]> CyberLeo.Net >> Repos - FreeBSD/releng/10.0.git/blob - sys/net80211/ieee80211_radiotap.h
- Copy stable/10 (r259064) to releng/10.0 as part of the
[FreeBSD/releng/10.0.git] / sys / net80211 / ieee80211_radiotap.h
1 /* $FreeBSD$ */
2 /* $NetBSD: ieee80211_radiotap.h,v 1.16 2007/01/06 05:51:15 dyoung Exp $ */
3
4 /*-
5  * Copyright (c) 2003, 2004 David Young.  All rights reserved.
6  *
7  * Redistribution and use in source and binary forms, with or without
8  * modification, are permitted provided that the following conditions
9  * are met:
10  * 1. Redistributions of source code must retain the above copyright
11  *    notice, this list of conditions and the following disclaimer.
12  * 2. Redistributions in binary form must reproduce the above copyright
13  *    notice, this list of conditions and the following disclaimer in the
14  *    documentation and/or other materials provided with the distribution.
15  * 3. The name of David Young may not be used to endorse or promote
16  *    products derived from this software without specific prior
17  *    written permission.
18  *
19  * THIS SOFTWARE IS PROVIDED BY DAVID YOUNG ``AS IS'' AND ANY
20  * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
21  * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
22  * PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL DAVID
23  * YOUNG BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
24  * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED
25  * TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
26  * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
27  * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
28  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
29  * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY
30  * OF SUCH DAMAGE.
31  */
32 #ifndef _NET80211_IEEE80211_RADIOTAP_H_
33 #define _NET80211_IEEE80211_RADIOTAP_H_
34
35 /* A generic radio capture format is desirable. It must be
36  * rigidly defined (e.g., units for fields should be given),
37  * and easily extensible.
38  *
39  * The following is an extensible radio capture format. It is
40  * based on a bitmap indicating which fields are present.
41  *
42  * I am trying to describe precisely what the application programmer
43  * should expect in the following, and for that reason I tell the
44  * units and origin of each measurement (where it applies), or else I
45  * use sufficiently weaselly language ("is a monotonically nondecreasing
46  * function of...") that I cannot set false expectations for lawyerly
47  * readers.
48  */
49 #if defined(__KERNEL__) || defined(_KERNEL)
50 #ifndef DLT_IEEE802_11_RADIO
51 #define DLT_IEEE802_11_RADIO    127     /* 802.11 plus WLAN header */
52 #endif
53 #endif /* defined(__KERNEL__) || defined(_KERNEL) */
54
55 #define IEEE80211_RADIOTAP_HDRLEN       64      /* XXX deprecated */
56
57 struct ieee80211_radiotap_vendor_header {
58         uint8_t         vh_oui[3];      /* 3 byte vendor OUI */
59         uint8_t         vh_sub_ns;      /* Sub namespace of this section */
60         uint16_t        vh_skip_len;    /* Length of this vendor section */
61 } __packed;
62
63 /*
64  * The radio capture header precedes the 802.11 header.
65  *
66  * Note well: all radiotap fields are little-endian.
67  */
68 struct ieee80211_radiotap_header {
69         uint8_t         it_version;     /* Version 0. Only increases
70                                          * for drastic changes,
71                                          * introduction of compatible
72                                          * new fields does not count.
73                                          */
74         uint8_t         it_pad;
75         uint16_t        it_len;         /* length of the whole
76                                          * header in bytes, including
77                                          * it_version, it_pad,
78                                          * it_len, and data fields.
79                                          */
80         uint32_t        it_present;     /* A bitmap telling which
81                                          * fields are present. Set bit 31
82                                          * (0x80000000) to extend the
83                                          * bitmap by another 32 bits.
84                                          * Additional extensions are made
85                                          * by setting bit 31.
86                                          */
87 } __packed;
88
89 /*
90  * Name                                 Data type       Units
91  * ----                                 ---------       -----
92  *
93  * IEEE80211_RADIOTAP_TSFT              uint64_t        microseconds
94  *
95  *      Value in microseconds of the MAC's 64-bit 802.11 Time
96  *      Synchronization Function timer when the first bit of the
97  *      MPDU arrived at the MAC. For received frames, only.
98  *
99  * IEEE80211_RADIOTAP_CHANNEL           2 x uint16_t    MHz, bitmap
100  *
101  *      Tx/Rx frequency in MHz, followed by flags (see below).
102  *
103  * IEEE80211_RADIOTAP_FHSS              uint16_t        see below
104  *
105  *      For frequency-hopping radios, the hop set (first byte)
106  *      and pattern (second byte).
107  *
108  * IEEE80211_RADIOTAP_RATE              uint8_t         500kb/s or index
109  *
110  *      Tx/Rx data rate.  If bit 0x80 is set then it represents an
111  *      an MCS index and not an IEEE rate.
112  *
113  * IEEE80211_RADIOTAP_DBM_ANTSIGNAL     int8_t          decibels from
114  *                                                      one milliwatt (dBm)
115  *
116  *      RF signal power at the antenna, decibel difference from
117  *      one milliwatt.
118  *
119  * IEEE80211_RADIOTAP_DBM_ANTNOISE      int8_t          decibels from
120  *                                                      one milliwatt (dBm)
121  *
122  *      RF noise power at the antenna, decibel difference from one
123  *      milliwatt.
124  *
125  * IEEE80211_RADIOTAP_DB_ANTSIGNAL      uint8_t         decibel (dB)
126  *
127  *      RF signal power at the antenna, decibel difference from an
128  *      arbitrary, fixed reference.
129  *
130  * IEEE80211_RADIOTAP_DB_ANTNOISE       uint8_t         decibel (dB)
131  *
132  *      RF noise power at the antenna, decibel difference from an
133  *      arbitrary, fixed reference point.
134  *
135  * IEEE80211_RADIOTAP_LOCK_QUALITY      uint16_t        unitless
136  *
137  *      Quality of Barker code lock. Unitless. Monotonically
138  *      nondecreasing with "better" lock strength. Called "Signal
139  *      Quality" in datasheets.  (Is there a standard way to measure
140  *      this?)
141  *
142  * IEEE80211_RADIOTAP_TX_ATTENUATION    uint16_t        unitless
143  *
144  *      Transmit power expressed as unitless distance from max
145  *      power set at factory calibration.  0 is max power.
146  *      Monotonically nondecreasing with lower power levels.
147  *
148  * IEEE80211_RADIOTAP_DB_TX_ATTENUATION uint16_t        decibels (dB)
149  *
150  *      Transmit power expressed as decibel distance from max power
151  *      set at factory calibration.  0 is max power.  Monotonically
152  *      nondecreasing with lower power levels.
153  *
154  * IEEE80211_RADIOTAP_DBM_TX_POWER      int8_t          decibels from
155  *                                                      one milliwatt (dBm)
156  *
157  *      Transmit power expressed as dBm (decibels from a 1 milliwatt
158  *      reference). This is the absolute power level measured at
159  *      the antenna port.
160  *
161  * IEEE80211_RADIOTAP_FLAGS             uint8_t         bitmap
162  *
163  *      Properties of transmitted and received frames. See flags
164  *      defined below.
165  *
166  * IEEE80211_RADIOTAP_ANTENNA           uint8_t         antenna index
167  *
168  *      Unitless indication of the Rx/Tx antenna for this packet.
169  *      The first antenna is antenna 0.
170  *
171  * IEEE80211_RADIOTAP_XCHANNEL          uint32_t        bitmap
172  *                                      uint16_t        MHz
173  *                                      uint8_t         channel number
174  *                                      int8_t          .5 dBm
175  *
176  *      Extended channel specification: flags (see below) followed by
177  *      frequency in MHz, the corresponding IEEE channel number, and
178  *      finally the maximum regulatory transmit power cap in .5 dBm
179  *      units.  This property supersedes IEEE80211_RADIOTAP_CHANNEL
180  *      and only one of the two should be present.
181  */
182 enum ieee80211_radiotap_type {
183         IEEE80211_RADIOTAP_TSFT = 0,
184         IEEE80211_RADIOTAP_FLAGS = 1,
185         IEEE80211_RADIOTAP_RATE = 2,
186         IEEE80211_RADIOTAP_CHANNEL = 3,
187         IEEE80211_RADIOTAP_FHSS = 4,
188         IEEE80211_RADIOTAP_DBM_ANTSIGNAL = 5,
189         IEEE80211_RADIOTAP_DBM_ANTNOISE = 6,
190         IEEE80211_RADIOTAP_LOCK_QUALITY = 7,
191         IEEE80211_RADIOTAP_TX_ATTENUATION = 8,
192         IEEE80211_RADIOTAP_DB_TX_ATTENUATION = 9,
193         IEEE80211_RADIOTAP_DBM_TX_POWER = 10,
194         IEEE80211_RADIOTAP_ANTENNA = 11,
195         IEEE80211_RADIOTAP_DB_ANTSIGNAL = 12,
196         IEEE80211_RADIOTAP_DB_ANTNOISE = 13,
197         /*
198          * 14-17 are from Linux, they overlap the netbsd-specific
199          * fields.
200          */
201         IEEE80211_RADIOTAP_RX_FLAGS = 14,
202         IEEE80211_RADIOTAP_TX_FLAGS = 15,
203         IEEE80211_RADIOTAP_RTS_RETRIES = 16,
204         IEEE80211_RADIOTAP_DATA_RETRIES = 17,
205
206         IEEE80211_RADIOTAP_XCHANNEL = 18,
207         IEEE80211_RADIOTAP_MCS = 19,
208         IEEE80211_RADIOTAP_AMPDU_STATUS = 20,
209
210         IEEE80211_RADIOTAP_RADIOTAP_NAMESPACE = 29,
211         IEEE80211_RADIOTAP_VENDOREXT = 30,
212         IEEE80211_RADIOTAP_EXT = 31,
213 };
214
215 #ifndef _KERNEL
216 /* channel attributes */
217 #define IEEE80211_CHAN_TURBO    0x00000010 /* Turbo channel */
218 #define IEEE80211_CHAN_CCK      0x00000020 /* CCK channel */
219 #define IEEE80211_CHAN_OFDM     0x00000040 /* OFDM channel */
220 #define IEEE80211_CHAN_2GHZ     0x00000080 /* 2 GHz spectrum channel. */
221 #define IEEE80211_CHAN_5GHZ     0x00000100 /* 5 GHz spectrum channel */
222 #define IEEE80211_CHAN_PASSIVE  0x00000200 /* Only passive scan allowed */
223 #define IEEE80211_CHAN_DYN      0x00000400 /* Dynamic CCK-OFDM channel */
224 #define IEEE80211_CHAN_GFSK     0x00000800 /* GFSK channel (FHSS PHY) */
225 #define IEEE80211_CHAN_GSM      0x00001000 /* 900 MHz spectrum channel */
226 #define IEEE80211_CHAN_STURBO   0x00002000 /* 11a static turbo channel only */
227 #define IEEE80211_CHAN_HALF     0x00004000 /* Half rate channel */
228 #define IEEE80211_CHAN_QUARTER  0x00008000 /* Quarter rate channel */
229 #endif /* !_KERNEL */
230
231 /* For IEEE80211_RADIOTAP_FLAGS */
232 #define IEEE80211_RADIOTAP_F_CFP        0x01    /* sent/received
233                                                  * during CFP
234                                                  */
235 #define IEEE80211_RADIOTAP_F_SHORTPRE   0x02    /* sent/received
236                                                  * with short
237                                                  * preamble
238                                                  */
239 #define IEEE80211_RADIOTAP_F_WEP        0x04    /* sent/received
240                                                  * with WEP encryption
241                                                  */
242 #define IEEE80211_RADIOTAP_F_FRAG       0x08    /* sent/received
243                                                  * with fragmentation
244                                                  */
245 #define IEEE80211_RADIOTAP_F_FCS        0x10    /* frame includes FCS */
246 #define IEEE80211_RADIOTAP_F_DATAPAD    0x20    /* frame has padding between
247                                                  * 802.11 header and payload
248                                                  * (to 32-bit boundary)
249                                                  */
250 #define IEEE80211_RADIOTAP_F_BADFCS     0x40    /* does not pass FCS check */
251 #define IEEE80211_RADIOTAP_F_SHORTGI    0x80    /* HT short GI */
252
253 #endif /* !_NET80211_IEEE80211_RADIOTAP_H_ */