]> CyberLeo.Net >> Repos - FreeBSD/releng/10.0.git/blob - tools/tools/net80211/wlantxtime/wlantxtime.c
- Copy stable/10 (r259064) to releng/10.0 as part of the
[FreeBSD/releng/10.0.git] / tools / tools / net80211 / wlantxtime / wlantxtime.c
1 /*-
2  * Copyright (c) 2007-2009 Sam Leffler, Errno Consulting
3  * All rights reserved.
4  *
5  * Redistribution and use in source and binary forms, with or without
6  * modification, are permitted provided that the following conditions
7  * are met:
8  * 1. Redistributions of source code must retain the above copyright
9  *    notice, this list of conditions and the following disclaimer.
10  * 2. Redistributions in binary form must reproduce the above copyright
11  *    notice, this list of conditions and the following disclaimer in the
12  *    documentation and/or other materials provided with the distribution.
13  *
14  * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
15  * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
16  * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
17  * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
18  * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
19  * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
20  * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
21  * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
22  * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
23  * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
24  */
25
26 #include <sys/cdefs.h>
27 __FBSDID("$FreeBSD$");
28
29 /*
30  * IEEE 802.11 PHY-related support.
31  */
32
33 #include <sys/param.h>
34 #include <sys/types.h>
35
36 #include <net/if_llc.h>
37
38 #include <net80211/_ieee80211.h>
39 #include <net80211/ieee80211.h>
40
41 #define IEEE80211_F_SHPREAMBLE  0x00040000      /* STATUS: use short preamble */
42
43 #include <err.h>
44 #include <stdio.h>
45 #include <stdarg.h>
46 #include <stdlib.h>
47 #include <strings.h>
48 #include <unistd.h>
49
50 struct ieee80211_rate_table {
51         int             rateCount;              /* NB: for proper padding */
52         uint8_t         rateCodeToIndex[256];   /* back mapping */
53         struct {
54                 uint8_t         phy;            /* CCK/OFDM/TURBO */
55                 uint32_t        rateKbps;       /* transfer rate in kbs */
56                 uint8_t         shortPreamble;  /* mask for enabling short
57                                                  * preamble in CCK rate code */
58                 uint8_t         dot11Rate;      /* value for supported rates
59                                                  * info element of MLME */
60                 uint8_t         ctlRateIndex;   /* index of next lower basic
61                                                  * rate; used for dur. calcs */
62                 uint16_t        lpAckDuration;  /* long preamble ACK dur. */
63                 uint16_t        spAckDuration;  /* short preamble ACK dur. */
64         } info[32];
65 };
66
67 uint16_t
68 ieee80211_compute_duration(const struct ieee80211_rate_table *rt,
69         uint32_t frameLen, uint16_t rate, int isShortPreamble);
70
71 #define KASSERT(c, msg) do {                    \
72         if (!(c)) {                             \
73                 printf msg;                     \
74                 putchar('\n');                  \
75                 exit(-1);                       \
76         }                                       \
77 } while (0)
78
79 static void
80 panic(const char *fmt, ...)
81 {
82         va_list ap;
83
84         va_start(ap, fmt);
85         vprintf(fmt, ap);
86         va_end(ap);
87         exit(-1);
88 }
89
90 /* shorthands to compact tables for readability */
91 #define OFDM    IEEE80211_T_OFDM
92 #define CCK     IEEE80211_T_CCK
93 #define TURBO   IEEE80211_T_TURBO
94 #define HALF    IEEE80211_T_OFDM_HALF
95 #define QUART   IEEE80211_T_OFDM_QUARTER
96 #define PBCC    (IEEE80211_T_OFDM_QUARTER+1)            /* XXX */
97 #define B(r)    (0x80 | r)
98 #define Mb(x)   (x*1000)
99
100 static struct ieee80211_rate_table ieee80211_11b_table = {
101     .rateCount = 4,             /* XXX no PBCC */
102     .info = {
103 /*                                   short            ctrl  */
104 /*                                Preamble  dot11Rate Rate */
105      [0] = { .phy = CCK,     1000,    0x00,      B(2),   0 },/*   1 Mb */
106      [1] = { .phy = CCK,     2000,    0x04,      B(4),   1 },/*   2 Mb */
107      [2] = { .phy = CCK,     5500,    0x04,     B(11),   1 },/* 5.5 Mb */
108      [3] = { .phy = CCK,    11000,    0x04,     B(22),   1 },/*  11 Mb */
109      [4] = { .phy = PBCC,   22000,    0x04,        44,   3 } /*  22 Mb */
110     },
111 };
112
113 static struct ieee80211_rate_table ieee80211_11g_table = {
114     .rateCount = 12,
115     .info = {
116 /*                                   short            ctrl  */
117 /*                                Preamble  dot11Rate Rate */
118      [0] = { .phy = CCK,     1000,    0x00,      B(2),   0 },
119      [1] = { .phy = CCK,     2000,    0x04,      B(4),   1 },
120      [2] = { .phy = CCK,     5500,    0x04,     B(11),   2 },
121      [3] = { .phy = CCK,    11000,    0x04,     B(22),   3 },
122      [4] = { .phy = OFDM,    6000,    0x00,        12,   4 },
123      [5] = { .phy = OFDM,    9000,    0x00,        18,   4 },
124      [6] = { .phy = OFDM,   12000,    0x00,        24,   6 },
125      [7] = { .phy = OFDM,   18000,    0x00,        36,   6 },
126      [8] = { .phy = OFDM,   24000,    0x00,        48,   8 },
127      [9] = { .phy = OFDM,   36000,    0x00,        72,   8 },
128     [10] = { .phy = OFDM,   48000,    0x00,        96,   8 },
129     [11] = { .phy = OFDM,   54000,    0x00,       108,   8 }
130     },
131 };
132
133 static struct ieee80211_rate_table ieee80211_11a_table = {
134     .rateCount = 8,
135     .info = {
136 /*                                   short            ctrl  */
137 /*                                Preamble  dot11Rate Rate */
138      [0] = { .phy = OFDM,    6000,    0x00,     B(12),   0 },
139      [1] = { .phy = OFDM,    9000,    0x00,        18,   0 },
140      [2] = { .phy = OFDM,   12000,    0x00,     B(24),   2 },
141      [3] = { .phy = OFDM,   18000,    0x00,        36,   2 },
142      [4] = { .phy = OFDM,   24000,    0x00,     B(48),   4 },
143      [5] = { .phy = OFDM,   36000,    0x00,        72,   4 },
144      [6] = { .phy = OFDM,   48000,    0x00,        96,   4 },
145      [7] = { .phy = OFDM,   54000,    0x00,       108,   4 }
146     },
147 };
148
149 static struct ieee80211_rate_table ieee80211_half_table = {
150     .rateCount = 8,
151     .info = {
152 /*                                   short            ctrl  */
153 /*                                Preamble  dot11Rate Rate */
154      [0] = { .phy = HALF,    3000,    0x00,      B(6),   0 },
155      [1] = { .phy = HALF,    4500,    0x00,         9,   0 },
156      [2] = { .phy = HALF,    6000,    0x00,     B(12),   2 },
157      [3] = { .phy = HALF,    9000,    0x00,        18,   2 },
158      [4] = { .phy = HALF,   12000,    0x00,     B(24),   4 },
159      [5] = { .phy = HALF,   18000,    0x00,        36,   4 },
160      [6] = { .phy = HALF,   24000,    0x00,        48,   4 },
161      [7] = { .phy = HALF,   27000,    0x00,        54,   4 }
162     },
163 };
164
165 static struct ieee80211_rate_table ieee80211_quarter_table = {
166     .rateCount = 8,
167     .info = {
168 /*                                   short            ctrl  */
169 /*                                Preamble  dot11Rate Rate */
170      [0] = { .phy = QUART,   1500,    0x00,      B(3),   0 },
171      [1] = { .phy = QUART,   2250,    0x00,         4,   0 },
172      [2] = { .phy = QUART,   3000,    0x00,      B(9),   2 },
173      [3] = { .phy = QUART,   4500,    0x00,         9,   2 },
174      [4] = { .phy = QUART,   6000,    0x00,     B(12),   4 },
175      [5] = { .phy = QUART,   9000,    0x00,        18,   4 },
176      [6] = { .phy = QUART,  12000,    0x00,        24,   4 },
177      [7] = { .phy = QUART,  13500,    0x00,        27,   4 }
178     },
179 };
180
181 static struct ieee80211_rate_table ieee80211_turbog_table = {
182     .rateCount = 7,
183     .info = {
184 /*                                   short            ctrl  */
185 /*                                Preamble  dot11Rate Rate */
186      [0] = { .phy = TURBO,   12000,   0x00,     B(12),   0 },
187      [1] = { .phy = TURBO,   24000,   0x00,     B(24),   1 },
188      [2] = { .phy = TURBO,   36000,   0x00,        36,   1 },
189      [3] = { .phy = TURBO,   48000,   0x00,     B(48),   3 },
190      [4] = { .phy = TURBO,   72000,   0x00,        72,   3 },
191      [5] = { .phy = TURBO,   96000,   0x00,        96,   3 },
192      [6] = { .phy = TURBO,  108000,   0x00,       108,   3 }
193     },
194 };
195
196 static struct ieee80211_rate_table ieee80211_turboa_table = {
197     .rateCount = 8,
198     .info = {
199 /*                                   short            ctrl  */
200 /*                                Preamble  dot11Rate Rate */
201      [0] = { .phy = TURBO,   12000,   0x00,     B(12),   0 },
202      [1] = { .phy = TURBO,   18000,   0x00,        18,   0 },
203      [2] = { .phy = TURBO,   24000,   0x00,     B(24),   2 },
204      [3] = { .phy = TURBO,   36000,   0x00,        36,   2 },
205      [4] = { .phy = TURBO,   48000,   0x00,     B(48),   4 },
206      [5] = { .phy = TURBO,   72000,   0x00,        72,   4 },
207      [6] = { .phy = TURBO,   96000,   0x00,        96,   4 },
208      [7] = { .phy = TURBO,  108000,   0x00,       108,   4 }
209     },
210 };
211
212 #undef  Mb
213 #undef  B
214 #undef  OFDM
215 #undef  CCK
216 #undef  TURBO
217 #undef  XR
218
219 /*
220  * Setup a rate table's reverse lookup table and fill in
221  * ack durations.  The reverse lookup tables are assumed
222  * to be initialized to zero (or at least the first entry).
223  * We use this as a key that indicates whether or not
224  * we've previously setup the reverse lookup table.
225  *
226  * XXX not reentrant, but shouldn't matter
227  */
228 static void
229 ieee80211_setup_ratetable(struct ieee80211_rate_table *rt)
230 {
231 #define N(a)    (sizeof(a)/sizeof(a[0]))
232 #define WLAN_CTRL_FRAME_SIZE \
233         (sizeof(struct ieee80211_frame_ack) + IEEE80211_CRC_LEN)
234
235         int i;
236
237         for (i = 0; i < N(rt->rateCodeToIndex); i++)
238                 rt->rateCodeToIndex[i] = (uint8_t) -1;
239         for (i = 0; i < rt->rateCount; i++) {
240                 uint8_t code = rt->info[i].dot11Rate;
241                 uint8_t cix = rt->info[i].ctlRateIndex;
242                 uint8_t ctl_rate = rt->info[cix].dot11Rate;
243
244                 rt->rateCodeToIndex[code] = i;
245                 if (code & IEEE80211_RATE_BASIC) {
246                         /*
247                          * Map w/o basic rate bit too.
248                          */
249                         code &= IEEE80211_RATE_VAL;
250                         rt->rateCodeToIndex[code] = i;
251                 }
252
253                 /*
254                  * XXX for 11g the control rate to use for 5.5 and 11 Mb/s
255                  *     depends on whether they are marked as basic rates;
256                  *     the static tables are setup with an 11b-compatible
257                  *     2Mb/s rate which will work but is suboptimal
258                  *
259                  * NB: Control rate is always less than or equal to the
260                  *     current rate, so control rate's reverse lookup entry
261                  *     has been installed and following call is safe.
262                  */
263                 rt->info[i].lpAckDuration = ieee80211_compute_duration(rt,
264                         WLAN_CTRL_FRAME_SIZE, ctl_rate, 0);
265                 rt->info[i].spAckDuration = ieee80211_compute_duration(rt,
266                         WLAN_CTRL_FRAME_SIZE, ctl_rate, IEEE80211_F_SHPREAMBLE);
267         }
268
269 #undef WLAN_CTRL_FRAME_SIZE
270 #undef N
271 }
272
273 /* Setup all rate tables */
274 static void
275 ieee80211_phy_init(void)
276 {
277 #define N(arr)  (int)(sizeof(arr) / sizeof(arr[0]))
278         static struct ieee80211_rate_table * const ratetables[] = {
279                 &ieee80211_half_table,
280                 &ieee80211_quarter_table,
281                 &ieee80211_11a_table,
282                 &ieee80211_11g_table,
283                 &ieee80211_turbog_table,
284                 &ieee80211_turboa_table,
285                 &ieee80211_turboa_table,
286                 &ieee80211_11a_table,
287                 &ieee80211_11g_table,
288                 &ieee80211_11b_table
289         };
290         int i;
291
292         for (i = 0; i < N(ratetables); ++i)
293                 ieee80211_setup_ratetable(ratetables[i]);
294
295 #undef N
296 }
297 #define CCK_SIFS_TIME           10
298 #define CCK_PREAMBLE_BITS       144
299 #define CCK_PLCP_BITS           48
300
301 #define OFDM_SIFS_TIME          16
302 #define OFDM_PREAMBLE_TIME      20
303 #define OFDM_PLCP_BITS          22
304 #define OFDM_SYMBOL_TIME        4
305
306 #define OFDM_HALF_SIFS_TIME     32
307 #define OFDM_HALF_PREAMBLE_TIME 40
308 #define OFDM_HALF_PLCP_BITS     22
309 #define OFDM_HALF_SYMBOL_TIME   8
310
311 #define OFDM_QUARTER_SIFS_TIME          64
312 #define OFDM_QUARTER_PREAMBLE_TIME      80
313 #define OFDM_QUARTER_PLCP_BITS          22
314 #define OFDM_QUARTER_SYMBOL_TIME        16
315
316 #define TURBO_SIFS_TIME         8
317 #define TURBO_PREAMBLE_TIME     14
318 #define TURBO_PLCP_BITS         22
319 #define TURBO_SYMBOL_TIME       4
320
321 #define HT_L_STF        8
322 #define HT_L_LTF        8
323 #define HT_L_SIG        4
324 #define HT_SIG          8
325 #define HT_STF          4
326 #define HT_LTF(n)       ((n) * 4)
327
328 /*
329  * Compute the time to transmit a frame of length frameLen bytes
330  * using the specified rate, phy, and short preamble setting.
331  * SIFS is included.
332  */
333 uint16_t
334 ieee80211_compute_duration(const struct ieee80211_rate_table *rt,
335         uint32_t frameLen, uint16_t rate, int isShortPreamble)
336 {
337         uint8_t rix = rt->rateCodeToIndex[rate];
338         uint32_t bitsPerSymbol, numBits, numSymbols, phyTime, txTime;
339         uint32_t kbps;
340
341         KASSERT(rix != (uint8_t)-1, ("rate %d has no info", rate));
342         kbps = rt->info[rix].rateKbps;
343         if (kbps == 0)                  /* XXX bandaid for channel changes */
344                 return 0;
345
346         switch (rt->info[rix].phy) {
347         case IEEE80211_T_CCK:
348                 phyTime         = CCK_PREAMBLE_BITS + CCK_PLCP_BITS;
349                 if (isShortPreamble && rt->info[rix].shortPreamble)
350                         phyTime >>= 1;
351                 numBits         = frameLen << 3;
352                 txTime          = CCK_SIFS_TIME + phyTime
353                                 + ((numBits * 1000)/kbps);
354                 break;
355         case IEEE80211_T_OFDM:
356                 bitsPerSymbol   = (kbps * OFDM_SYMBOL_TIME) / 1000;
357                 KASSERT(bitsPerSymbol != 0, ("full rate bps"));
358
359                 numBits         = OFDM_PLCP_BITS + (frameLen << 3);
360                 numSymbols      = howmany(numBits, bitsPerSymbol);
361                 txTime          = OFDM_SIFS_TIME
362                                 + OFDM_PREAMBLE_TIME
363                                 + (numSymbols * OFDM_SYMBOL_TIME);
364                 break;
365         case IEEE80211_T_OFDM_HALF:
366                 bitsPerSymbol   = (kbps * OFDM_HALF_SYMBOL_TIME) / 1000;
367                 KASSERT(bitsPerSymbol != 0, ("1/4 rate bps"));
368
369                 numBits         = OFDM_PLCP_BITS + (frameLen << 3);
370                 numSymbols      = howmany(numBits, bitsPerSymbol);
371                 txTime          = OFDM_HALF_SIFS_TIME
372                                 + OFDM_HALF_PREAMBLE_TIME
373                                 + (numSymbols * OFDM_HALF_SYMBOL_TIME);
374                 break;
375         case IEEE80211_T_OFDM_QUARTER:
376                 bitsPerSymbol   = (kbps * OFDM_QUARTER_SYMBOL_TIME) / 1000;
377                 KASSERT(bitsPerSymbol != 0, ("1/2 rate bps"));
378
379                 numBits         = OFDM_PLCP_BITS + (frameLen << 3);
380                 numSymbols      = howmany(numBits, bitsPerSymbol);
381                 txTime          = OFDM_QUARTER_SIFS_TIME
382                                 + OFDM_QUARTER_PREAMBLE_TIME
383                                 + (numSymbols * OFDM_QUARTER_SYMBOL_TIME);
384                 break;
385         case IEEE80211_T_TURBO:
386                 /* we still save OFDM rates in kbps - so double them */
387                 bitsPerSymbol = ((kbps << 1) * TURBO_SYMBOL_TIME) / 1000;
388                 KASSERT(bitsPerSymbol != 0, ("turbo bps"));
389
390                 numBits       = TURBO_PLCP_BITS + (frameLen << 3);
391                 numSymbols    = howmany(numBits, bitsPerSymbol);
392                 txTime        = TURBO_SIFS_TIME + TURBO_PREAMBLE_TIME
393                               + (numSymbols * TURBO_SYMBOL_TIME);
394                 break;
395         default:
396                 panic("%s: unknown phy %u (rate %u)\n", __func__,
397                       rt->info[rix].phy, rate);
398                 break;
399         }
400         return txTime;
401 }
402
403 uint32_t
404 ieee80211_compute_duration_ht(const struct ieee80211_rate_table *rt,
405         uint32_t frameLen, uint16_t rate,
406         int streams, int isht40, int isShortGI)
407 {
408         static const uint16_t ht20_bps[16] = {
409             26, 52, 78, 104, 156, 208, 234, 260,
410             52, 104, 156, 208, 312, 416, 468, 520
411         };
412         static const uint16_t ht40_bps[16] = {
413             54, 108, 162, 216, 324, 432, 486, 540,
414             108, 216, 324, 432, 648, 864, 972, 1080,
415         };
416         uint32_t bitsPerSymbol, numBits, numSymbols, txTime;
417
418         KASSERT(rate & IEEE80211_RATE_MCS, ("not mcs %d", rate));
419         KASSERT((rate &~ IEEE80211_RATE_MCS) < 16, ("bad mcs 0x%x", rate));
420
421         if (isht40)
422                 bitsPerSymbol = ht40_bps[rate & 0xf];
423         else
424                 bitsPerSymbol = ht20_bps[rate & 0xf];
425         numBits = OFDM_PLCP_BITS + (frameLen << 3);
426         numSymbols = howmany(numBits, bitsPerSymbol);
427         if (isShortGI)
428                 txTime = ((numSymbols * 18) + 4) / 5;   /* 3.6us */
429         else
430                 txTime = numSymbols * 4;                /* 4us */
431         return txTime + HT_L_STF + HT_L_LTF +
432             HT_L_SIG + HT_SIG + HT_STF + HT_LTF(streams);
433 }
434
435 static const struct ieee80211_rate_table *
436 mode2table(const char *mode)
437 {
438         if (strcasecmp(mode, "half") == 0)
439                 return &ieee80211_half_table;
440         else if (strcasecmp(mode, "quarter") == 0)
441                 return &ieee80211_quarter_table;
442         else if (strcasecmp(mode, "hta") == 0)
443                 return &ieee80211_11a_table;    /* XXX */
444         else if (strcasecmp(mode, "htg") == 0)
445                 return &ieee80211_11g_table;    /* XXX */
446         else if (strcasecmp(mode, "108g") == 0)
447                 return &ieee80211_turbog_table;
448         else if (strcasecmp(mode, "sturbo") == 0)
449                 return &ieee80211_turboa_table;
450         else if (strcasecmp(mode, "turbo") == 0)
451                 return &ieee80211_turboa_table;
452         else if (strcasecmp(mode, "11a") == 0)
453                 return &ieee80211_11a_table;
454         else if (strcasecmp(mode, "11g") == 0)
455                 return &ieee80211_11g_table;
456         else if (strcasecmp(mode, "11b") == 0)
457                 return &ieee80211_11b_table;
458         else
459                 return NULL;
460 }
461
462 const char *
463 srate(int rate)
464 {
465         static char buf[32];
466         if (rate & 1)
467                 snprintf(buf, sizeof(buf), "%u.5", rate/2);
468         else
469                 snprintf(buf, sizeof(buf), "%u", rate/2);
470         return buf;
471 }
472
473 static int
474 checkpreamble(const struct ieee80211_rate_table *rt, uint8_t rix,
475         int isShortPreamble, int verbose)
476 {
477         if (isShortPreamble) {
478                 if (rt->info[rix].phy != IEEE80211_T_CCK) {
479                         if (verbose)
480                                 warnx("short preamble not meaningful, ignored");
481                         isShortPreamble = 0;
482                 } else if (!rt->info[rix].shortPreamble) {
483                         if (verbose)
484                                 warnx("short preamble not meaningful with "
485                                     "rate %s, ignored",
486                                     srate(rt->info[rix].dot11Rate &~ IEEE80211_RATE_BASIC));
487                         isShortPreamble = 0;
488                 }
489         }
490         return isShortPreamble;
491 }
492
493 static void
494 usage(const char *progname)
495 {
496         fprintf(stderr, "usage: %s [-a] [-l framelen] [-m mode] [-r rate] [-s]\n",
497             progname);
498         fprintf(stderr, "-a             display calculations for all possible rates\n");
499         fprintf(stderr, "-l framelen    length in bytes of 802.11 payload (default 1536)\n");
500         fprintf(stderr, "-m 11a         calculate for 11a channel\n");
501         fprintf(stderr, "-m 11b         calculate for 11b channel\n");
502         fprintf(stderr, "-m 11g         calculate for 11g channel (default)\n");
503         fprintf(stderr, "-m half        calculate for 1/2 width channel\n");
504         fprintf(stderr, "-m quarter     calculate for 1/4 width channel\n");
505         fprintf(stderr, "-m 108g        calculate for dynamic turbo 11g channel\n");
506         fprintf(stderr, "-m sturbo      calculate for static turbo channel\n");
507         fprintf(stderr, "-m turbo       calculate for dynamic turbo 11a channel\n");
508         fprintf(stderr, "-r rate        IEEE rate code (default 54)\n");
509         fprintf(stderr, "-s             short preamble (default long)\n");
510         exit(0);
511 }
512
513 int
514 main(int argc, char *argv[])
515 {
516         const struct ieee80211_rate_table *rt;
517         const char *mode;
518         uint32_t frameLen;
519         uint16_t rate;
520         uint16_t time;
521         uint8_t rix;
522         int ch, allrates, isShortPreamble, isShort;
523         float frate;
524
525         ieee80211_phy_init();
526
527         mode = "11g";
528         isShortPreamble = 0;
529         frameLen = 1500
530                  + sizeof(struct ieee80211_frame)
531                  + LLC_SNAPFRAMELEN
532                  + IEEE80211_CRC_LEN
533                  ;
534         rate = 2*54;
535         allrates = 0;
536         while ((ch = getopt(argc, argv, "al:m:r:s")) != -1) {
537                 switch (ch) {
538                 case 'a':
539                         allrates = 1;
540                         break;
541                 case 'l':
542                         frameLen = strtoul(optarg, NULL, 0);
543                         break;
544                 case 'm':
545                         mode = optarg;
546                         break;
547                 case 'r':
548                         frate = atof(optarg);
549                         rate = (int) 2*frate;
550                         break;
551                 case 's':
552                         isShortPreamble = 1;
553                         break;
554                 default:
555                         usage(argv[0]);
556                         break;
557                 }
558         }
559         rt = mode2table(mode);
560         if (rt == NULL)
561                 errx(-1, "unknown mode %s", mode);
562         if (!allrates) {
563                 rix = rt->rateCodeToIndex[rate];
564                 if (rix == (uint8_t) -1)
565                         errx(-1, "rate %s not valid for mode %s", srate(rate), mode);
566                 isShort = checkpreamble(rt, rix, isShortPreamble, 1);
567
568                 time = ieee80211_compute_duration(rt, frameLen, rate, isShort);
569                 printf("%u usec to send %u bytes @ %s Mb/s, %s preamble\n",
570                     time, frameLen, srate(rate),
571                     isShort ? "short" : "long");
572         } else {
573                 for (rix = 0; rix < rt->rateCount; rix++) {
574                         rate = rt->info[rix].dot11Rate &~ IEEE80211_RATE_BASIC;
575                         isShort = checkpreamble(rt, rix, isShortPreamble, 0);
576                         time = ieee80211_compute_duration(rt, frameLen, rate,
577                             isShort);
578                         printf("%u usec to send %u bytes @ %s Mb/s, %s preamble\n",
579                             time, frameLen, srate(rate),
580                             isShort ? "short" : "long");
581                 }
582         }
583         return 0;
584 }