]> CyberLeo.Net >> Repos - FreeBSD/releng/10.0.git/blob - usr.bin/ar/ar.c
- Copy stable/10 (r259064) to releng/10.0 as part of the
[FreeBSD/releng/10.0.git] / usr.bin / ar / ar.c
1 /*-
2  * Copyright (c) 2007 Kai Wang
3  * Copyright (c) 2007 Tim Kientzle
4  * Copyright (c) 2007 Joseph Koshy
5  * All rights reserved.
6  *
7  * Redistribution and use in source and binary forms, with or without
8  * modification, are permitted provided that the following conditions
9  * are met:
10  * 1. Redistributions of source code must retain the above copyright
11  *    notice, this list of conditions and the following disclaimer
12  *    in this position and unchanged.
13  * 2. Redistributions in binary form must reproduce the above copyright
14  *    notice, this list of conditions and the following disclaimer in the
15  *    documentation and/or other materials provided with the distribution.
16  *
17  * THIS SOFTWARE IS PROVIDED BY THE AUTHOR(S) ``AS IS'' AND ANY EXPRESS OR
18  * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
19  * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
20  * IN NO EVENT SHALL THE AUTHOR(S) BE LIABLE FOR ANY DIRECT, INDIRECT,
21  * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
22  * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
23  * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
24  * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
25  * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
26  * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
27  */
28
29 /*-
30  * Copyright (c) 1990, 1993, 1994
31  *      The Regents of the University of California.  All rights reserved.
32  *
33  * This code is derived from software contributed to Berkeley by
34  * Hugh Smith at The University of Guelph.
35  *
36  * Redistribution and use in source and binary forms, with or without
37  * modification, are permitted provided that the following conditions
38  * are met:
39  * 1. Redistributions of source code must retain the above copyright
40  *    notice, this list of conditions and the following disclaimer.
41  * 2. Redistributions in binary form must reproduce the above copyright
42  *    notice, this list of conditions and the following disclaimer in the
43  *    documentation and/or other materials provided with the distribution.
44  * 3. Neither the name of the University nor the names of its contributors
45  *    may be used to endorse or promote products derived from this software
46  *    without specific prior written permission.
47  *
48  * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
49  * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
50  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
51  * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
52  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
53  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
54  * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
55  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
56  * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
57  * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
58  * SUCH DAMAGE.
59  */
60
61 #include <sys/cdefs.h>
62 __FBSDID("$FreeBSD$");
63
64 #include <sys/queue.h>
65 #include <sys/types.h>
66 #include <archive.h>
67 #include <errno.h>
68 #include <getopt.h>
69 #include <libgen.h>
70 #include <stdio.h>
71 #include <stdlib.h>
72 #include <string.h>
73 #include <sysexits.h>
74
75 #include "ar.h"
76
77 enum options
78 {
79         OPTION_HELP
80 };
81
82 static struct option longopts[] =
83 {
84         {"help", no_argument, NULL, OPTION_HELP},
85         {"version", no_argument, NULL, 'V'},
86         {NULL, 0, NULL, 0}
87 };
88
89 static void     bsdar_usage(void);
90 static void     ranlib_usage(void);
91 static void     set_mode(struct bsdar *bsdar, char opt);
92 static void     only_mode(struct bsdar *bsdar, const char *opt,
93                     const char *valid_modes);
94 static void     bsdar_version(void);
95 static void     ranlib_version(void);
96
97 int
98 main(int argc, char **argv)
99 {
100         struct bsdar    *bsdar, bsdar_storage;
101         char            *p;
102         size_t           len;
103         int              i, opt;
104
105         bsdar = &bsdar_storage;
106         memset(bsdar, 0, sizeof(*bsdar));
107
108         if ((bsdar->progname = getprogname()) == NULL)
109                 bsdar->progname = "ar";
110
111         /* Act like ranlib if our name ends in "ranlib"; this
112          * accommodates arm-freebsd7.1-ranlib, bsdranlib, etc. */
113         len = strlen(bsdar->progname);
114         if (len >= strlen("ranlib") &&
115             strcmp(bsdar->progname + len - strlen("ranlib"), "ranlib") == 0) {
116                 while ((opt = getopt_long(argc, argv, "tDV", longopts,
117                     NULL)) != -1) {
118                         switch(opt) {
119                         case 't':
120                                 /* Ignored. */
121                                 break;
122                         case 'D':
123                                 bsdar->options |= AR_D;
124                                 break;
125                         case 'V':
126                                 ranlib_version();
127                                 break;
128                         case OPTION_HELP:
129                                 ranlib_usage();
130                         default:
131                                 ranlib_usage();
132                         }
133                 }
134                 argv += optind;
135                 argc -= optind;
136
137                 if (*argv == NULL)
138                         ranlib_usage();
139
140                 bsdar->options |= AR_S;
141                 for (;(bsdar->filename = *argv++) != NULL;)
142                         ar_mode_s(bsdar);
143
144                 exit(EX_OK);
145         } else {
146                 if (argc < 2)
147                         bsdar_usage();
148
149                 if (*argv[1] != '-') {
150                         len = strlen(argv[1]) + 2;
151                         if ((p = malloc(len)) == NULL)
152                                 bsdar_errc(bsdar, EX_SOFTWARE, errno,
153                                     "malloc failed");
154                         *p = '-';
155                         (void)strlcpy(p + 1, argv[1], len - 1);
156                         argv[1] = p;
157                 }
158         }
159
160         while ((opt = getopt_long(argc, argv, "abCcdDfijlMmopqrSsTtuVvxz",
161             longopts, NULL)) != -1) {
162                 switch(opt) {
163                 case 'a':
164                         bsdar->options |= AR_A;
165                         break;
166                 case 'b':
167                 case 'i':
168                         bsdar->options |= AR_B;
169                         break;
170                 case 'C':
171                         bsdar->options |= AR_CC;
172                         break;
173                 case 'c':
174                         bsdar->options |= AR_C;
175                         break;
176                 case 'd':
177                         set_mode(bsdar, opt);
178                         break;
179                 case 'D':
180                         bsdar->options |= AR_D;
181                         break;
182                 case 'f':
183                 case 'T':
184                         bsdar->options |= AR_TR;
185                         break;
186                 case 'j':
187                         /* ignored */
188                         break;
189                 case 'l':
190                         /* ignored, for GNU ar comptibility */
191                         break;
192                 case 'M':
193                         set_mode(bsdar, opt);
194                         break;
195                 case 'm':
196                         set_mode(bsdar, opt);
197                         break;
198                 case 'o':
199                         bsdar->options |= AR_O;
200                         break;
201                 case 'p':
202                         set_mode(bsdar, opt);
203                         break;
204                 case 'q':
205                         set_mode(bsdar, opt);
206                         break;
207                 case 'r':
208                         set_mode(bsdar, opt);
209                         break;
210                 case 'S':
211                         bsdar->options |= AR_SS;
212                         break;
213                 case 's':
214                         bsdar->options |= AR_S;
215                         break;
216                 case 't':
217                         set_mode(bsdar, opt);
218                         break;
219                 case 'u':
220                         bsdar->options |= AR_U;
221                         break;
222                 case 'V':
223                         bsdar_version();
224                         break;
225                 case 'v':
226                         bsdar->options |= AR_V;
227                         break;
228                 case 'x':
229                         set_mode(bsdar, opt);
230                         break;
231                 case 'z':
232                         /* ignored */
233                         break;
234                 case OPTION_HELP:
235                         bsdar_usage();
236                 default:
237                         bsdar_usage();
238                 }
239         }
240
241         argv += optind;
242         argc -= optind;
243
244         if (*argv == NULL && bsdar->mode != 'M')
245                 bsdar_usage();
246
247         if (bsdar->options & AR_A && bsdar->options & AR_B)
248                 bsdar_errc(bsdar, EX_USAGE, 0,
249                     "only one of -a and -[bi] options allowed");
250
251         if (bsdar->options & AR_J && bsdar->options & AR_Z)
252                 bsdar_errc(bsdar, EX_USAGE, 0,
253                     "only one of -j and -z options allowed");
254
255         if (bsdar->options & AR_S && bsdar->options & AR_SS)
256                 bsdar_errc(bsdar, EX_USAGE, 0,
257                     "only one of -s and -S options allowed");
258
259         if (bsdar->options & (AR_A | AR_B)) {
260                 if ((bsdar->posarg = *argv) == NULL)
261                         bsdar_errc(bsdar, EX_USAGE, 0,
262                             "no position operand specified");
263                 if ((bsdar->posarg = basename(bsdar->posarg)) == NULL)
264                         bsdar_errc(bsdar, EX_SOFTWARE, errno,
265                             "basename failed");
266                 argc--;
267                 argv++;
268         }
269
270         if (bsdar->options & AR_A)
271                 only_mode(bsdar, "-a", "mqr");
272         if (bsdar->options & AR_B)
273                 only_mode(bsdar, "-b", "mqr");
274         if (bsdar->options & AR_C)
275                 only_mode(bsdar, "-c", "qr");
276         if (bsdar->options & AR_CC)
277                 only_mode(bsdar, "-C", "x");
278         if (bsdar->options & AR_D)
279                 only_mode(bsdar, "-D", "qr");
280         if (bsdar->options & AR_O)
281                 only_mode(bsdar, "-o", "x");
282         if (bsdar->options & AR_SS)
283                 only_mode(bsdar, "-S", "mqr");
284         if (bsdar->options & AR_U)
285                 only_mode(bsdar, "-u", "qrx");
286
287         if (bsdar->mode == 'M') {
288                 ar_mode_script(bsdar);
289                 exit(EX_OK);
290         }
291
292         if ((bsdar->filename = *argv) == NULL)
293                 bsdar_usage();
294
295         bsdar->argc = --argc;
296         bsdar->argv = ++argv;
297
298         if ((!bsdar->mode || strchr("ptx", bsdar->mode)) &&
299             bsdar->options & AR_S) {
300                 ar_mode_s(bsdar);
301                 if (!bsdar->mode)
302                         exit(EX_OK);
303         }
304
305         switch(bsdar->mode) {
306         case 'd':
307                 ar_mode_d(bsdar);
308                 break;
309         case 'm':
310                 ar_mode_m(bsdar);
311                 break;
312         case 'p':
313                 ar_mode_p(bsdar);
314                 break;
315         case 'q':
316                 ar_mode_q(bsdar);
317                 break;
318         case 'r':
319                 ar_mode_r(bsdar);
320                 break;
321         case 't':
322                 ar_mode_t(bsdar);
323                 break;
324         case 'x':
325                 ar_mode_x(bsdar);
326                 break;
327         default:
328                 bsdar_usage();
329                 /* NOTREACHED */
330         }
331
332         for (i = 0; i < bsdar->argc; i++)
333                 if (bsdar->argv[i] != NULL)
334                         bsdar_warnc(bsdar, 0, "%s: not found in archive",
335                             bsdar->argv[i]);
336
337         exit(EX_OK);
338 }
339
340 static void
341 set_mode(struct bsdar *bsdar, char opt)
342 {
343
344         if (bsdar->mode != '\0' && bsdar->mode != opt)
345                 bsdar_errc(bsdar, EX_USAGE, 0,
346                     "Can't specify both -%c and -%c", opt, bsdar->mode);
347         bsdar->mode = opt;
348 }
349
350 static void
351 only_mode(struct bsdar *bsdar, const char *opt, const char *valid_modes)
352 {
353
354         if (strchr(valid_modes, bsdar->mode) == NULL)
355                 bsdar_errc(bsdar, EX_USAGE, 0,
356                     "Option %s is not permitted in mode -%c", opt, bsdar->mode);
357 }
358
359 static void
360 bsdar_usage(void)
361 {
362
363         (void)fprintf(stderr, "usage:  ar -d [-Tjsvz] archive file ...\n");
364         (void)fprintf(stderr, "\tar -m [-Tjsvz] archive file ...\n");
365         (void)fprintf(stderr, "\tar -m [-Tabijsvz] position archive file ...\n");
366         (void)fprintf(stderr, "\tar -p [-Tv] archive [file ...]\n");
367         (void)fprintf(stderr, "\tar -q [-TcDjsvz] archive file ...\n");
368         (void)fprintf(stderr, "\tar -r [-TcDjsuvz] archive file ...\n");
369         (void)fprintf(stderr, "\tar -r [-TabcDijsuvz] position archive file ...\n");
370         (void)fprintf(stderr, "\tar -s [-jz] archive\n");
371         (void)fprintf(stderr, "\tar -t [-Tv] archive [file ...]\n");
372         (void)fprintf(stderr, "\tar -x [-CTouv] archive [file ...]\n");
373         (void)fprintf(stderr, "\tar -V\n");
374         exit(EX_USAGE);
375 }
376
377 static void
378 ranlib_usage(void)
379 {
380
381         (void)fprintf(stderr, "usage:   ranlib [-t] archive ...\n");
382         (void)fprintf(stderr, "\tranlib -V\n");
383         exit(EX_USAGE);
384 }
385
386 static void
387 bsdar_version(void)
388 {
389         (void)printf("BSD ar %s - %s\n", BSDAR_VERSION, archive_version_string());
390         exit(EX_OK);
391 }
392
393 static void
394 ranlib_version(void)
395 {
396         (void)printf("ranlib %s - %s\n", BSDAR_VERSION, archive_version_string());
397         exit(EX_OK);
398 }